system help

[Cronaldo11890]

I recently built a 60 site aero machinee. I used a 4 1/3circular drill. Now the 5 inch net pots and 3 dont fit right. I dont feel like drilling new holes ans spending more money, is there a way i can use rubber washers so that the three inch will fit nice and snug?

[rara]

have a look at your local plumbing centre they should be able to help just make up a story it shouldnt be hard

[fuzzy]

Im confused, is the hole to big or to small.

Yes you can fix it and cheaply, I just need to know what direction you need to go. The net pot is to small or to big for the hole?

[ghostrider]

so dum dum why dont you use 4" net pots with a collar. google them or if you have 3" net pots cover the holes with square stiff cardboard and punch a 3" hole in it. make sense? 6mm panda poly will work too

[fuzzy]

so will styroboard, home depot, 5 bucs, draw a circle around the net pot, and you can use a knife to cut it out. Just cut a little smaller than the circle so it fits tight, I use aluminum tape also home depot 3 to 5 bucs to make sure light doesnt go thru the white styro board. Your problem is a easy fix